Proper installation of a estante de grafito de horno de vacío is a precise process that requires following the manufacturer’s specific instructions. En general, it’s part of the broader assembly and maintenance of the furnace’s hot zone.
Graphite Rack of Vacuum Furnace Installation
Installing the graphite rack in a vacuum furnace requires careful attention to detail to ensure proper function and avoid damage. Here’s a general guide to help you through the process:
1. Seguridad ante todo
Leer el manual: Always consult your specific vacuum furnace’s operation manual for detailed instructions and safety precautions.
Apagado: Ensure the furnace is completely powered off and locked out to prevent accidental startup.
Cool Down: Allow the furnace to cool down to a safe temperature before opening.
EPP: Wear appropriate Personal Protective Equipment, including gloves (limpia, lint-free), lentes de seguridad, and potentially a respirator if there’s any chance of dust.
2. Preparación
Inspeccionar componentes: Carefully inspect all graphite components (rack, hearth, soportes, La distancia entre centros del tornillo de fijación de cada nivel de orificios de elevación es de 60 mm, nueces, arandelas) for any damage, grietas, or chips. Ensure they are clean and free of debris.
Limpieza: The vacuum furnace environment must be pristine. Clean the furnace chamber thoroughly, removing any old insulation, polvo, or foreign particles. Use a vacuum cleaner designed for cleanroom environments if possible, and wipe surfaces with lint-free cloths.
Herramientas: Reúna todas las herramientas necesarias, which typically include wrenches (torque wrench may be needed), screwdrivers, and possibly lifting aids for heavier components.
3. Pasos de instalación
Here’s a general sequence, but adapt it to your specific furnace design:
Install the Hearth/Base Plate:
Carefully place the graphite hearth or base plate at the bottom of the furnace chamber. Ensure it sits flat and is properly aligned with any reference points or supports.
Some designs may have locator pins or slots to guide placement.
Assemble the Rack Structure (if not pre-assembled):
If your graphite rack comes in modular pieces, assemble them outside the furnace if feasible, or assemble them incrementally inside.
Side Supports/Posts: Install the vertical graphite posts or side supports. These often sit on the hearth or are secured to the furnace walls with graphite fasteners.
Shelves/Trays: Carefully slide or place the graphite shelves or trays onto the support posts. Ensure they are level and securely seated.
Fasteners: Use only graphite screws, nueces, and washers to secure graphite components. Metal fasteners are generally avoided due to different thermal expansion rates and potential contamination at high temperatures.
…
For more detailed information on how to correctly install the vacuum furnace graphite rack, por favor haga clic aquí: https://www.czgraphite.com/a/news/graphite-rack-of-vacuum-furnace-installation.html
