Valve bags are mostly used for filling granular or powdery materials, which are used for loading and unloading bulk materials for convenient transportation. So do you know how valve bags are filled?
​​
1. Valve bag filling process
​​
The square bottom machine can use valve pockets to contain all kinds of fine powder and ultra-fine powder materials with low bulk density, strong air affinity, good or bad self-flowing properties.
​​
The discharge port is unobstructed, the filling starts, the material enters the dividing wheel from the outer silo, and enters the ash hopper from the feeding port on the machine base. The material is evenly sent to the discharging port through the smooth rotation of the impeller. Lightly touch the travel switch on the right side of the material nozzle, the sealing cylinder shrinks, and the material falls into the bag smoothly.

HD200D-IIIDJ Square Bottom Machine

Using the valve bag packaging machine, the material is evenly filled into the valve bag through the discharge seat, and then the filling amount is controlled by weight, and the sealing cylinder extends into the working state to seal the discharge port. That’s all for the valve bag filling process.

2. Advantages of automatic filling and molding of valve pockets
​​
(1) The valve bag can withstand high temperature filling at 70~80℃ and dozens of handling turnovers.

For more details click to visit:https://www.lyhuatianm.com/products-information/valve-bag-filling-process.html